HXP SERIES

Surface Mount LED Operating Room

DESCRIPTION

HXP provides a supplemental, asymmetric/symmetric surface mount lighting solution in the operatoiing room. The HXP is available 1×4, 2×2, and 2×4 sizes and it is typically positioned around the perimeter of the operating room.

Available with various housings, doorframes, and lens materials to become the ideal fixture for any operating room application.

DOORFRAME

Various doorframe materials available, if additional options are needed, consult factory. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance – 92%. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners.

DOORFRAME GASKET

One-piece closed cell silicone gasket seals doorframe to housing.

HOUSING

Various housing options are available, if additional options are needed, consult factory. All doors attached to the housing with two stainless steel aircraft cables. Stainless steel Phillips head screws painted to match door finish to secure door frame to housing. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Antimicrobial finish standard on all exposed painted surfaces of installed luminaire.

ELECTRICAL SYSTEM

Electronic driver 0-10V, 1% and 10% dimming standard. For outputs A and B, 0-10V 10% dimming driver (no dim to off) is standard. For outputs C-J, 0-10V 1% dim to off dimming driver standard. Long-life LED system rated for >120K hours (L70 @ 25°C). Complies with federal energy efficiency standards.

OPTICAL SYSTEM

Various lens options available, if additional options are needed, consult factory. RFI 3/8” square metal grid, grounded to the housing.

LED

80 CRI or 90 CRI LEDs available in 2700K, 3000K, 3500K, 4000K and 5000K. Life is >120,000 hours at 70% lumen maintenance. Red (630nm) and Green (520nm) LEDs also available.

MOUNTING

Surface Mount

LISTINGS

  • UL Listed
  • Wet Location (optional)
  • American Recovery and Reinvestment Act (ARRA) compliant
  • Buy American Act (BAA) compliant

WARRANTY

Any component that fails due to manufacturing defect is guaranteed for five years. The warranty does not cover physical damage, abuse or instances of uncontrollable natural forces. See the full PROFORM warranty document for detailed information.

7885 N Glen Harbor Blvd
Glendale, AZ 85307

© 2021 Barron Lighting Group.
All rights reserved.

STAY IN THE KNOW

We'll tell you about new products and technology as it is released.